 |
SI-TERM100 |
100 contact Terminal Block adapter
The SI-TERM100 terminal block boards easily interface user I/O signals to the 100-pin analog I/O connector of Sheldon Instruments PC Plug-in hardware.
|
Connect the SI-TERM100 Terminal Adapter to the DSP Board with either the shielded cable SI-100D100D or the Y configured
50-pin IDC ribbon pair cable SI-100D5050.
|
|
SI-TERM68 |
68 contact Terminal Block adapter.
The SI-TERM68 terminal block boards easily interface user I/O signals to the 68-pin digital I/O connector of Sheldon Instruments PC Plug-in hardware.
|
Connect the SI-TERM68 Terminal Adapter to the DSP Board with the shielded cable SI-68D68D.
|
 |
SI-TERM100-BRIDGE |
100 contact Terminal Block adapter with bridge signal conditioning.
The SI-TERM100-BRIDGE terminal block board easily interfaces user I/O signals along with any bridge style transducers, to Sheldon Instruments PC Plug-in
hardware |
Connect the SI-TERM100-BRIDGE Terminal Adapter to the DSP Board with either the shielded cable SI-100D100D or the Y
configured 50-pin IDC ribbon pair cable SI-100D5050.
|
 |
SI-40IDCx68D |
40 pin IDC to 68 pin DSub (SCSI3) Adapter Bracket.
The SI-40IDCx68D adapter bracket brings out the digital I/Os present on the SI-MOD68xx module for easy access on the back of a desktop
system; a 40 conductor ribbon cable is included. |
For PC's only. |
 |
SI-PC104x50IDC |
4x30 2mm Connector to 50 Pin IDC Header Pair Adapter Card.
The SI-PC104x50IDC adapter card brings out the analog I/Os present on the SI-MOD68xx module for easy access to a pair of 50 pin ribbon
cables when placed in a PC104Plus card stack; a pair of 50 conductor ribbon cables are included (100 conductors total). |
Adapter for SI-MOD68xx |
 |
SI-PC104PxPCI |
PC104Plus to PCI Adapter Card for a desktop system. |
The SI-PC104PxPCI card allows the insertion of our SI-C671xDSP-PC104p (or any
PC104 Plus card) into a system configured with conventional PCI slots. |
 |
SI-ATXPWR-PCI104 |
ATX Power to PCI-104 Adapter Card for powering a PCI104 system using a generic ATX power supply. |
The SI-ATXPWR-PCI104 card allows for any PCI-104 stack to be powered with +3.3Vdc, +5Vdc, and +/-12Vdc using a generic ATX
power supply. |
 |
SI-100D100D |
100 Pin 0.050" DSub to 100 Pin 0.050" DSub cable. |
3ft length |
 |
SI-100D5050 |
"Y" configured cable; 100 Pin 0.050" DSub to 50 Pin IDC ribbon cable pair. |
1 meter or 2 meter length available |
|
SI-68D68D |
68 Pin 0.050" DSub to 68 Pin 0.050" DSub cable. |
6ft length |
